PureMed™
Antibacterial fabric safe for people, easy to disinfect, and suitable for multiple users in hospitals or rehabilitation centers. Contains Silver Zeolite components and complies with REACH regulation. Light, soft and easy to shape.

AirMesh™
Aerating-massaging fabric used in areas with direct body contact. Increases comfort and significantly reduces the risk of bedsores.

VISmemo™
Memory foam that adjusts to the user’s body shape under pressure and becomes softer with body-temperature. The highest standard in anti-bedsore prophylaxis in high-risk areas.

Comfort foam
Soft foam with many small closed air bubbles, which easily adapt to the user’s body shape.

AntySlip™
A non-slip fabric which prevents cushions and pillows from moving on the mattress.

• Compliant with the REACH regulation aimed at ensuring a high level of health and environmental protection.
• Passed the cigarette test and the matchstick test, proving it is a non-flammable fabric.
• Free of heavy metals, phthalates, allergic substances and carcinogens.
• Lightweight, soft, elastic and easy to shape.
• OEKO-TEX STANDARD 100® certified for skin-friendly parameters.
• Waterproof and one-way vapour-permeable.
• Breathable, antibacterial and easy to disinfect.
• Hygienic certificate issued by the National Institute of Public Health.
• PureMed™ is vapour-permeable in one way only – the air from the inside may migrate freely outside.
• It is antibacterial and easy to disinfect.

PERMITTED DISINFECTING AGENTS
Type of active agent or surfactant	Maximum content in the disinfectant	Spray the surface of the product with a disinfectant, leave it on the surface for the required time, then rinse with water and dry.
2-propanol	35%
1-propanol	25%
Ethanol	10%
Benzalconium chloride	0,2%
Glucoprotamin	25%

PureMed™ meets all the essential requirements of the medical products of different kinds, according to the Regulation of the Ministers of Health on 3 November 2004 and the requirements contained in Annex I to Council Directive 93/42/EEC of 14 June 1993 concerning medical devices , deployed by the law of 30 April 2004 of Medical Devices (OJ L 93 of 2004., pos. 896). It is a flexible fabric which is safe for people. It is antibacterial, waterproof, vapour permeable and easy to disinfect.PureMed™ should be cleaned according to the laundry guide. Coated materials should be cleaned with the use of neutral pH soap solution (about 7) applied with a soft sponge or a damp cloth. Rub gently and wipe dry to remove the rest of the detergent. In order to keep the original colour and shine level, the procedure should be repeated every month.

Stains should come out if you use 25% solution of ethanol. Rub gently and wipe dry to remove the rest of the detergent.

Please, bear in mind that some stains might not be completely removed from the cleaned surface. It depends on several factors like active dyers permanently migrating to the material surface, the material composition and finish, or chemical composition of dirt as well as the time the soiling has remained on the material surface.

You should pay particular attention to the generally available domestic cleansers whose components might react with the soiling and cause an effect contrary to what was originally intended.

Remember that PureMed™ should never be cleaned with domestic cleansers and cleaning agents that are generally recommended for ‘eco-leather’.

Surface weight	200 ± 15 [g/m²]
Type of PU coating	100 [%]
Type of PES carrier	100 [%]
Strength breaking along	≥20 [daN/5cm]
Strength breaking	≥10 [daN/5cm]
Waterproof	≥2000 [mm of H₂O]
Vapour permeability	≥300 [g/m²/24h]