Description
The AM-SB-13 pelvic stabilisation belt is a medical device providing quick and simple stabilisation of the entire pelvic girdle. It consists of a wide, anatomically shaped pelvic belt and a strong circumferential strap, ending with two Velcro fasteners. This solution allows quick and secure stabilisation of the pelvis, even in difficult hospital conditions.
The pelvic belt is covered with hook and loop fabric, so the belt provides a wide range of circumferential adjustment. It will be suitable for people with small as well as large hip sizes.
The belt is made of the antibacterial and easy to disinfect medical material PureMed™. This material has a number of approvals and can be disinfected with all kinds of chemicals, which is why the AM-SB-13 pelvic stabilisation belt can be successfully used in health care facilities such as hospitals, rehabilitation clinics and seniors’ homes.
The AM-SB-13 pelvic belt effectively immobilises the pelvis in cases of suspected pelvic fracture. Through its strong stabilising effect it also reduces pain in cases of chronic inflammation or arthrosis of the iliac crest or sacrum.
The sterile pelvic stabilisation belt AM-SB-13 has no metal components and is therefore ideal as an external pelvic stabiliser for diagnostic imaging and examinations using CT, MRI or X-rays.
Structure and Maintenence
Special features of PureMed™
- Compliant with the REACH regulation aimed at ensuring a high level of health and environmental protection.
- Passed the cigarette test and the matchstick test, proving it is a non-flammable fabric.
- Free of heavy metals, phthalates, allergic substances and carcinogens.
- Lightweight, soft, elastic and easy to shape.
- OEKO-TEX STANDARD 100® certified for skin-friendly parameters.
- Th fabric is Waterproof.
- Hygienic certificate issued by the National Institute of Public Health.
- The fabric is breathable.
- PureMed™ is vapour-permeable in one way only – the air from the inside may migrate freely outside.
- It is antibacterial and easy to disinfect.
Disinfection
Maintenance
PureMed™ meets all the essential requirements of the medical products of different kinds, according to the Regulation of the Ministers of Health on 3 November 2004 and the requirements contained in Annex I to Council Directive 93/42/EEC of 14 June 1993 concerning medical devices , deployed by the law of 30 April 2004 of Medical Devices (OJ L 93 of 2004., pos. 896). It is a flexible fabric which is safe for people. It is antibacterial, waterproof, vapour permeable and easy to disinfect.PureMed™ should be cleaned according to the laundry guide. Coated materials should be cleaned with the use of neutral pH soap solution (about 7) applied with a soft sponge or a damp cloth. Rub gently and wipe dry to remove the rest of the detergent. In order to keep the original colour and shine level, the procedure should be repeated every month.
Stains should come out if you use 25% solution of ethanol. Rub gently and wipe dry to remove the rest of the detergent.
Please, bear in mind that some stains might not be completely removed from the cleaned surface. It depends on several factors like active dyers permanently migrating to the material surface, the material composition and finish, or chemical composition of dirt as well as the time the soiling has remained on the material surface.
You should pay particular attention to the generally available domestic cleansers whose components might react with the soiling and cause an effect contrary to what was originally intended.
Remember that PureMed™ should never be cleaned with domestic cleansers and cleaning agents that are generally recommended for ‘eco-leather’.
PureMed™ Technical specification
| Surface weight |
200 ± 15 [g/m²] |
| Type of PU coating |
100 [%] |
| Type of PES carrier |
100 [%] |
| Strength breaking along |
≥20 [daN/5cm] |
| Strength breaking |
≥10 [daN/5cm] |
| Waterproof |
≥2000 [mm of H₂O] |
| Vapour permeability |
≥300 [g/m²/24h] |
